Professional Kickout Flashing Installationin Sandy Springs GA
Stop Water Intrusion Before It Becomes a Problem
We Are Locally Owned & Operated For Over 24 Years
We Serve Businesses In And Around The Following Cities:
About Kickout Flashing in Sandy Springs, Georgia
Kickout Flashing Installation and Repair for Stucco, EIFS, and Dryvit in Sandy Springs, GA
Understanding the Challenges of Water Intrusion in Stucco and EIFS Systems
In the world of both residential and commercial construction, particularly in cities like Sandy Springs, Georgia, where architecture often leans into modern and Mediterranean-infused styles, stucco, EIFS (Exterior Insulation and Finish Systems), and Dryvit remain popular exterior cladding choices. As attractive and energy-efficient as these systems are, they come with inherent vulnerabilities—especially when it comes to moisture management at roof-to-wall intersections. While aesthetic appeal often drives initial material selection, long-term durability heavily depends on meticulous attention to water diversion techniques. Among the most critical components in this regard is kickout flashing.
Kickout flashing, a small but essential detail, serves as a lifeline in preventing water from channeling behind stucco facades or EIFS systems at junction points where a sloped roof meets a vertical wall. When absent, improperly installed, or degraded over time, water runoff from roofs can seep behind walls, eventually compromising sheathing, framing, and finishes. In the humid climate of Sandy Springs, frequent rainfall combined with the architectural intricacies of multifaceted rooflines further amplifies the risk of water intrusion. For property owners—whether managing a commercial retail space along Roswell Road or a charming residential estate off Lake Forrest Drive—overlooking the role of moisture barrier flashing and kickout diverter flashing can result in severe and costly consequences.
The Role of Kickout Flashing in Building Envelope Protection
To appreciate the importance of kickout flashing fully, it's necessary to understand how water behaves when it runs off a roof. At the intersection where a roof plane terminates at a wall, water doesn't simply fall harmlessly to the ground. Gravity pulls it along the roofing and wall surfaces. Without a correctly installed and angled kickout diverter flashing, this stream can enter the siding system—especially problematic with stucco and synthetic coverings like EIFS and Dryvit, which are more vulnerable to hidden moisture accumulation than other finishes.
This is where kickout flashing steps in. Installed at the start of the roof-to-wall transition, it serves as a guide, diverting water away from the wall surface and safely into a gutter system. Done accurately, it's a seamless component of the home's moisture management strategy. Done poorly or omitted entirely, it invites an ongoing cycle of decay. The integration of roof-wall intersection flashing is not simply a builder’s discretion—it has become a tried-and-true requirement in modern building codes due to its proven role in water damage prevention.
Experienced contractors like Advanced Stucco Repair have long understood that kickout flashing is less about compliance and more about protection. Their nuanced approach to integrating flashing into stucco and EIFS systems—especially during repairs—has helped property owners across Sandy Springs safeguard their investments against the type of damaging leaks that often remain undetected until mold, decay, or major aesthetic deformations become visible.
Common Issues from Improper or Missing Flashing
One of the key reasons kickout flashing remains a focal point in the stucco repair industry is the escalating number of homes and businesses experiencing moisture intrusion due to improper flashing practices during original construction. Often in real estate developments or rapid builds—many of which were part of the housing wave that swept through Sandy Springs in the last two decades—critical components like this were either omitted or poorly executed.
When flashing is absent, water doesn’t have an obvious place to travel. It slides behind the siding where it becomes trapped, especially in systems that rely on layered insulation and vapor barriers like EIFS and Dryvit. Over time, moisture begins to break down the integrity of the wall assembly. Homeowners might notice bubbling, staining, or cracks on stucco surfaces, while business owners may deal with interior peeling paint, sagging drywall, or worse—mold growth that puts employee and customer health at risk.
Advanced Stucco Repair has encountered numerous such cases across the Sandy Springs area. In one commercial property situated near the city center, years of accumulated water behind a Dryvit exterior led to weakened walls and performance issues in HVAC systems as moisture infiltrated utility spaces. Corrective action involved removing compromised material, repairing structural rot, and replacing the moisture barrier and flashing components entirely. Investment in proper flashing repair service upfront would have saved that business tens of thousands of dollars.
Installation Techniques and Material Considerations
The effectiveness of kickout flashing lies not only in its presence but also in its installation methodology. Crafted from corrosion-resistant materials such as galvanized steel, aluminum, or even copper for upscale applications, a kickout flashing piece must be formed and placed with a precision that ensures a firm fit and uninterrupted flow of water into the existing gutter system.
One common mistake contractors make is using caulking or sealants to patch areas where flashing should be. Sealants, while useful in some contexts, degrade over time and are far less reliable than properly directed metal flashing. In practice, a successful install—which Advanced Stucco Repair provides time and again—means lifting roof shingles, integrating the flashing under step flashing, fitting it snugly along the wall, and ensuring its angle effectively shoots water clear of vulnerable wall claddings.
Additionally, when retrofitting kickout flashing into existing homes or commercial buildings, especially those with dryvit or synthetic stucco systems, existing materials must be carefully cut away to expose the area. This demands surgical precision; overcutting or chiseling can compromise the aesthetic integrity of the surrounding wall. Advanced Stucco Repair uses specialized stucco repair techniques and equipment to make these modifications minimally invasive, preserving the building's appearance while maximizing its resistance to future damage.
Preventive Installation in New Construction vs. Remedial Repair
Integrating kickout flashing during initial construction and cladding is undoubtedly the ideal scenario. Contractors have full access to wall sheathing and underlying barriers, which allows them to assemble a seamless moisture management system. In new builds located throughout Sandy Springs’ expanding residential neighborhoods or high-end commercial districts, this forward-thinking step can serve as an unglamorous yet fundamental form of insurance.
However, many of the inquiries Advanced Stucco Repair receives center around remedial flashing repair services. These are often reactive responses—calls prompted by visible water stains, warped drywall, or repeated paint failure. Installing flashing in these cases requires not just technical know-how, but a comprehensive understanding of the building's water sensitivity and a plan for managing potential hidden issues.
Unlike superficial patch jobs, Advanced Stucco Repair systematically addresses root problems. Their repair teams remove and inspect sections of the wall for hidden moisture damage, treat mold if present, replace decayed framing, and then close the wall with all the necessary protections in place. By coupling moisture barrier flashing refurbishment with aesthetic stucco restoration, they leave properties both fortified and visually appealing.
Localized Climate Impact and Construction Trends
Sandy Springs, sitting on the outer cusp of Atlanta's northern corridor, receives significant rainfall across multiple seasons, making water management not only important but critical. Flashing details become even more relevant here than in some drier parts of the country. Moreover, the prevalence of complex rooflines in both single-family homes and commercial architecture adds risk—the more roof-wall intersections present, the more opportunities for water to wander into walls unless redirected properly.
This climatic context intersects with the architectural preference toward low-slope roof additions, multi-tiered eaves, and hard-coat stucco systems that retain moisture longer if penetration occurs. These features, while aesthetically striking, place greater performance demands on all protective layers, with kickout flashing becoming a frontline defense mechanism.
Advanced Stucco Repair’s familiarity with local building practices gives them a home-court advantage. Their work reflects an understanding not just of the component itself, but how Sandy Springs’ environment and building styles affect long-term durability. Their technicians aren’t just flashing installers—they’re problem solvers and construction diagnosticians trained to observe and respond with tailored solutions.
Case Studies in Residential and Commercial Contexts
One of the most powerful arguments for quality kickout flashing comes from real-world results. In a recently remodeled Sandy Springs home, the homeowner noticed interior bubbling on a second-floor bedroom wall after just two heavy rains. Initial assumptions pointed to pipe leaks, but an assessment by Advanced Stucco Repair identified the true culprit—missing kickout flashing at the end of a short gable roof, where water had been cascading directly into the EIFS system.
Their team executed a targeted repair: cutting back the EIFS to install custom-fabricated aluminum kickout flashing, restoring the exterior foam and mesh, applying fresh synthetic coating, and resealing the area. Post-repair moisture gauge testing revealed normal readings, and the homeowner hasn’t observed a single issue since.
In a commercial scenario, a condominium complex located near Hammond Drive faced repeated stucco staining and internal leaks, made worse by years of patchy fixes. Advanced Stucco Repair was brought in for a full wall diagnostics assessment. The result? Over a dozen small roof-wall intersections lacked proper kickout diverter flashing. Systematic installation across all vulnerable zones, paired with EIFS repairs and updated sealants, restored the building’s structural and aesthetic integrity—delivering peace of mind and demonstrating long-term return on investment for the property management firm.
What Property Owners Need to Know About Longevity and Maintenance
Once kickout flashing is installed—especially when done to professional standards—it typically requires little maintenance. That said, property owners should periodically inspect rooflines for debris accumulation or shifting gutters, which might alter water flow patterns. Vegetation like overhanging branches can also redirect rainwater, diminishing the effectiveness of even well-placed flashing.
For stucco or EIFS-clad properties, cracks near roof junctions or visible rust-colored streaks should serve as red flags. These signs often signal a breach or compromise in the cladding system stemming from inadequate water redirection. At Advanced Stucco Repair, routine property evaluations and minor tune-ups are part of a broader façade health strategy. By addressing small problems early, they help clients avoid massive repair bills down the line.
Ultimately, the key to a stucco or Dryvit system’s longevity lies not just in the materials, but in every little design detail—kickout flashing being one of the most crucial but underappreciated among them.
Trusting the Right Experts for Durable Protection
While there may be many general contractors capable of patching a wall or sealing a leak, mastering the specifics of moisture control in stucco and synthetic cladding systems demands specialization. The installers and technicians at Advanced Stucco Repair offer that level of expertise. Their background in moisture dynamics, their understanding of localized building conditions in Sandy Springs, and their precision working with both traditional and modern materials set them apart.
For residents looking to maintain the market value and beauty of their homes, and for commercial property managers committed to protecting their assets, correctly installed kickout flashing is not a luxury—it’s a pragmatic and essential safeguard. Whether part of new construction planning or a critical component of repair strategies, its value cannot be overstated.
Investing in such hidden-but-mighty protections today can prevent lawsuits, labor interruptions, and massive remediation costs tomorrow. And with professionals like Advanced Stucco Repair available in Sandy Springs, property owners are never more than a call away from comprehensive support.
As issues related to water intrusion continue to surface—especially in climates marked by heavy rainfall and temperature fluctuation—the demand for skilled flashing repair service grows. By understanding the science behind water diversion and staying vigilant to early signs of infiltration, homeowners and business owners alike can proactively protect their structures.
Kickout flashing may be one of the smallest elements added to your exterior wall system, but its capacity to prevent water damage, preserve building materials, and support long-term structural health is immense. For those in Sandy Springs who want the reassurance that their stucco, EIFS, or Dryvit installation is future-proof, few partners are better equipped than Advanced Stucco Repair.
Kickout Flashing Gallery
Call Us Today to receive your Free Quote for
Kickout Flashing in Sandy Springs
Serving: Sandy Springs, Georgia
About Sandy Springs, Georgia
Human settlement in the area can be traced back to approximately 400 CE, when Native Americans forged three trails to better access the area's freshwater springs. In the 16th century, the Creek Muskogee tribe settled the area, where they remained until the early 1800s, when they were forced out of the area due to the discovery of gold.
In 1821, the federal government held a number of land lotteries in the area, resulting in the purchase of land in present-day Sandy Springs and its subsequent settlement. The Austin-Johnson House, the oldest existing unaltered house, was built in 1842 on what is now Johnson Ferry Road. In 1851, Wilson Spruill donated 5 acres (2.0Â ha) of land for the founding of Sandy Springs United Methodist Church, near the natural spring for which the city is named. In 1905, the Hammond School was built at Johnson Ferry Road and Mt. Vernon Highway, across the street from the church.
In 1950, the state legislature blocked Atlanta from annexing the community, which remained rural until the Interstate Highway System was authorized by the Federal-Aid Highway Act of 1956. In 1959, after a fire at Hammond Elementary School, William Hartsfield, the mayor of Atlanta, urged residents to support annexation so that the area would have better firefighting protection. Community opposition killed the proposal. In the early 1960s, Georgia 400 and Interstate 285 were constructed, connecting Sandy Springs to metro Atlanta and initiating a housing boom that brought new residents and major land development as part of the white flight from Atlanta after the Civil Rights Movement won greater racial integration within Atlanta.
In 1965, Hartsfield once again proposed the annexation of the Sandy Springs area. Spokesmen for Sandy Springs promised residents to "build up a city separate from Atlanta and your Negroes and forbid any Negroes to buy, or own, or live within our limits" should they reject annexation. In 1966, annexation by Atlanta was defeated in a referendum, with two-thirds voting against.
Efforts to incorporate Sandy Springs began in 1966 in response to attempts by the city of Atlanta to annex this unincorporated area of north Fulton County.
In the early 1970s, the city of Atlanta attempted to use a state law to force annexation of Sandy Springs, which failed after the Supreme Court of Georgia ruled that the law was unconstitutional. In response, a group of residents formed the Committee for Sandy Springs 1975 to lobby for the incorporation of Sandy Springs.
During this time, proponents for an incorporated Sandy Springs argued that their taxes were disproportionately going to other, largely non-white, communities in Fulton County. In every legislative session, state legislators representing the area introduced a bill in the Georgia General Assembly to authorize a referendum on incorporation. Legislators representing Atlanta and southwestern Fulton County, who feared that tax revenue would be lost from incorporation, blocked the bills, using the procedural requirement that all local legislation be approved first by a delegation of representatives from the affected area.
In 1991, the Georgia state government determined that Sandy Springs, along with other wealthier, and predominantly white, communities in Fulton County was being taxed below statewide minimums, resulting in an increase in taxes for the area. Some Sandy Springs residents, including Mitch Skandalakis, launched a number of campaigns against the taxes, and launched an unsuccessful lawsuit against the state.
On January 16, 1997, Eric Rudolph bombed an abortion clinic in Sandy Springs.
When the Republican Party gained a majority in both houses of the Georgia General Assembly in 2005, the procedural rules previously used to prevent a vote by the full chamber were changed so that the bill was handled as a state bill and not as a local bill. The assembly also repealed the requirement that new cities must be at least 3 miles (4.8Â km) from existing cities that had stymied previous attempts to incorporate due to Sandy Springs directly bordering both Roswell and Atlanta. The bill allowing for a referendum on incorporation was introduced and passed as HB 37. The referendum initiative was approved by the Assembly and signed by Governor Sonny Perdue.
A referendum was held on June 21, 2005, and residents voted 94% in favor of incorporation. In November 2005, voters returned to the polls to elect a mayor and six city council members.
Formal incorporation occurred on December 1, making Sandy Springs the third-largest city ever to incorporate in the U.S. The city's police force and fire department began service in 2006. Upon incorporation, Sandy Springs initiated a nontraditional approach by operating as a public-private partnership (PPP), with all but six full-time employees being contracted.
In 2010, the city undertook a procurement process to rebid all general city services, which was won by CH2M Hill. The timing of this contract, during the Great Recession, allowed the city to leverage a cheaper contract due to the economic downturn.
In 2010, the city became the first jurisdiction in Georgia to successfully "bail out" from the preclearance requirements of Section 5 of the Voting Rights Act.
In 2019, the Sandy Springs City Council moved to scale back the PPP model, directly hiring 183 contract employees, leaving only 15 outsourced full-time workers by the end of 2019. The city will still outsource a number of services, including the city attorney's office, as well as security, street sweeping and ambulance services. The move was expected to save $2.7 million in the next year and more than $14 million over 5 years.
The boundaries of Sandy Springs are Atlanta to the south, Cobb County (at the Chattahoochee River) to the west and north, Roswell (also at the river) to the north, and Dunwoody and Brookhaven, at the DeKalb County line, to the east. A small panhandle in the northeast extends between the Chattahoochee River to the north and Dunwoody to the south, ending in a very small border with Peachtree Corners in the extreme western edge of Gwinnett County.
Sandy Springs has a humid subtropical climate (Köppen climate classification Cfa). During January and February 2014, the Atlanta area, including Sandy Springs, experienced a severe snow storm and a severe ice storm, both of which left much of the region without power, caused major travel disruptions, and the former storm forced people to take shelter in cars and schools as the city was underprepared for the black ice that prevented transport.
City Springs, the downtown district of Sandy Springs, is usually defined as the area to the south and east of Sandy Springs Circle, to the north of Interstate 285, and to the west of Boylston Drive. It is located approximately 12 miles directly north of Downtown Atlanta. In the absence of a traditional downtown, city leaders created City Springs, a multi-use development containing municipal offices, residential, retail, green space and a performing arts center, landmarking a formal "downtown" for its residents. City leaders purchased the property in 2008, which was once the site of a former Target (formerly Richway) shopping center, located between Roswell Road, Johnson Ferry Road, and Mount Vernon Highway. Since then, the surrounding area in the district has become a center for urban renewal for the city, with many new mixed-use apartment developments being planned or built, primarily replacing old strip malls along Roswell Road. The City Springs center officially opened in 2018, 10 years after the original site purchase. The official address for the complex is on Galambos Way, named after the city's first mayor, Eva Galambos. Within the City Springs district is Heritage Green, which is home to the spring which spurred the name of the city.
Riverside is the western district of the city, located south of Dalyrmple Road and west of Roswell Road, bordering the Chattahoochee River to the west, forming the western border with Cobb County. It is a high-income, residential area marked by winding, hilly roads and old growth forest. The main roads are Heards Ferry Road and Riverside Drive, and it is located off the Riverside Drive exit of I-285. Two of the public schools within Sandy Springs are located here, Heards Ferry Elementary and Riverwood International Charter School. The headquarters for the Fulton County Board of Education are also found in this district. Many of the neighborhoods in this area derive their name from the river.
The Dunwoody Panhandle, or just "The Panhandle" is a residential area bounded by the Dunwoody city limit to the south, the Chattahoochee River to the north, Georgia 400 to the west, and Peachtree Corners city limit to the east. The district's name is derived from the fact that it is wedged between the river and Dunwoody, forming a geographic panhandle. Major roads include Dunwoody Club Drive and Spalding Drive, and Interstate access is through the Northridge Road exit of Georgia 400. Many who lived in the neighborhood during Sandy Springs' incorporation considered themselves part of Dunwoody, and voiced their opposition to the installment of street sign toppers labelled "Sandy Springs". Then-mayor Eva Galambos stated that these new signs would do nothing to diminish the neighborhood's identity. Some residents still consider the area to be "Dunwoody in Sandy Springs", similar to the Buckhead Community district of Atlanta.
Perimeter Center is a commercial edge city and business district surrounding Perimeter Mall. Although about 40% of Perimeter Center, including the mall, is located in Dunwoody, the western 60%, including most of the area's office towers, are located in Sandy Springs. Pill Hill is located in the Sandy Springs section of Perimeter Center, and is the largest medical center in Georgia. It includes Northside Hospital, St. Joseph's Hospital, and Children's Healthcare of Atlanta. More than 40% of the hospital beds in the metro area are located within Sandy Springs. Landmarks include Hammond Park, Concourse at Landmark Center, colloquially called the 'King' and 'Queen' buildings due to their distinct white crown architecture at the top of each tower, as well as two MARTA stations, the Sandy Springs and Medical Center MARTA stations. The area also includes the 400-285 highway interchange, which is currently undergoing major construction. The top three tallest suburban buildings in the country are found here, the 'King' and 'Queen', and nearby Park Towers at #3.
North Springs is located in the northern portion of the city, and is generally defined as the area west of the Dunwoody/DeKalb County border, east of Brandon Mill Road, north of Abernathy Road, and south of Dalrymple Road and Spalding Drive. The North Springs MARTA station, the terminus of the MARTA Red Line, serves the district. Five of Sandy Springs' public schools are in this area, including the newest Ison Springs Elementary School, Woodland Elementary School, Spalding Drive Charter Elementary School, Sandy Springs Charter Middle School, and North Springs Charter High School.
South Springs or Sandy Springs ITP, an acronym for "inside the perimeter", refers to a portion of the city which extends south of Interstate 285, colloquially referred to as "the perimeter". It is located north of the City of Atlanta border, east of the Riverside district, south of Interstate 285, and west of the Brookhaven/DeKalb County border. The southern area of this district is considered to be a part of the greater Chastain Park community of Buckhead. The public schools in this area include Ridgeview Charter School and High Point Elementary School. The popular Atlanta radio station 99X broadcasts on 98.9 from here.
The business district just east of the river crossing is called Powers Ferry Landing, located where Northside Drive crosses the road, just east of the former landing. This provides freeway access at Northside Drive (west ramps) and New Northside Drive (east ramps, road and ramps built in a 1990s reconstruction). Signage on the freeway indicates Powers Ferry Road, Northside Drive, and New Northside Drive.
The North End is a large district in the northernmost portion of the city, and is generally defined as the area to the west of GA400, to the south and east of the Chattahoochee River, and to the north of Dalrymple Road. It is accessible via GA400 at Northridge Road, and contains the Northridge business area and the North River Village community. The Huntcliff community is located west of the district, on a panhandle to the northwest.
| Census | Pop. | Note | %± |
|---|---|---|---|
| 1980 | 46,877 | — | |
| 1990 | 67,842 | 44.7% | |
| 2000 | 85,781 | 26.4% | |
| 2010 | 93,853 | 9.4% | |
| 2020 | 108,080 | 15.2% | |
| U.S. Decennial Census 1850-1870 1870-1880 1890-1910 1920-1930 1940 1950 1960 1970 1980 1990 2000 2010 2020 | |||
(Note: the 2000 U.S. census numbers are for Sandy Springs prior to incorporation, but cover the same area.)
| Race / Ethnicity (NH = Non-Hispanic) | Pop 2000 | Pop 2010 | Pop 2020 | % 2000 | % 2010 | % 2020 |
|---|---|---|---|---|---|---|
| White alone (NH) | 62,657 | 55,066 | 58,130 | 73.04% | 58.67% | 53.78% |
| Black or African American alone (NH) | 10,139 | 18,092 | 19,773 | 11.82% | 19.28% | 18.29% |
| Native American or Alaska Native alone (NH) | 99 | 160 | 137 | 0.12% | 0.17% | 0.13% |
| Asian alone (NH) | 2,793 | 4,660 | 10,160 | 3.26% | 4.97% | 9.40% |
| Native Hawaiian or Pacific Islander alone (NH) | 40 | 33 | 56 | 0.05% | 0.04% | 0.05% |
| Some Other Race alone (NH) | 327 | 671 | 806 | 0.38% | 0.71% | 0.75% |
| Mixed Race or Multi-Racial (NH) | 1,212 | 1,803 | 4,278 | 1.41% | 1.92% | 3.96% |
| Hispanic or Latino (any race) | 8,514 | 13,368 | 14,740 | 9.93% | 14.24% | 13.64% |
| Total | 85,781 | 93,853 | 108,080 | 100.00% | 100.00% | 100.00% |
Sandy Springs was first listed as a census designated place in the 1980 U.S. census and incorporated prior to the 2010 U.S. census.
According to the 2020 United States census, there were 108,080 people, 52,820 households, and 25,861 families residing in the city; this is up from a population of 93,853 at the 2010 census, and 85,781 at the 2000 census. When it was first listed as a census designated place in 1980, its population was 46,877.
According to a 2008 estimate, the median income for a household in the city was $106,240, and the median income for a family was $129,810. The average income for a household was $116,406 and the average income for a family was $169,815. Males had a median income of $60,053 versus $50,030 for females. About 3.1% of families and 7.9% of the population were below the poverty line, including 8.9% of those under age 18 and 1.9% of those age 65 or over.
- Mayor: Rusty Paul
Sandy Springs was noted for contracting private companies to perform the majority of its services in a public-private partnership model of government at the beginning of its incorporation in 2005. While many governments contract with private-sector companies on a per-project basis, Sandy Springs is believed to be the first American city to outsource its services for the majority of ongoing operations. They chose to do so as an economic response to the Great Recession. The city regularly hosted delegations from other governments that were interested in the model. Services not outsourced include police, fire-rescue, and city management. The city moved away from the private-public partnership model in 2019 when it was realized how much money was lost to private contractors and hired 184 full-time city staff that work at the new City Springs development. It now operates as a hybrid model, outsourcing projects to private companies as needed. The city estimates $14 million will be saved over the next five years from hiring full-time staff.
A new city hall opened in 2018.
Public schools are operated by the Fulton County School System. Elementary schools serving sections of Sandy Springs include Dunwoody Springs Charter Elementary School, Heards Ferry Elementary School, High Point Elementary School, Ison Springs Elementary School, Lake Forest Elementary School, Spalding Drive Charter Elementary School, and Woodland Charter Elementary School. Two middle schools, Sandy Springs Middle School and Ridgeview Charter Middle School, and two high schools, North Springs Charter School of Arts and Sciences and Riverwood High School, are in and serve Sandy Springs.
Private schools located in Sandy Springs include:
- Brandon Hall School (5th grade through high school)
- Springmont (formerly First Montessori School of Atlanta) (preschool through middle school)
- Atlanta Jewish Academy (K–12)
- Holy Innocents' Episcopal School (preschool through high school)
- Mount Vernon Presbyterian School (preschool through high school)
- St. Jude the Apostle Catholic School (K–8)
- Opened September 4, 1962
- The Alfred and Adele Davis Academy (K–8)
- The Felicia Penzell Weber Jewish Community High School a.k.a. The Weber School (high school)
- The Epstein School (K–8)
- Holy Spirit Preparatory School Lower Campus (the upper campus and preschool are in Atlanta)
- Cumberland Academy
The initial campus of Sophia Academy, which opened in 1999, was on a rental property, in what became Sandy Springs. Construction on its new campus on what later became Chamblee began circa 2007.