Professional Kickout Flashing Installation
in Columbus GA

Stop Water Intrusion Before It Becomes a Problem

We Are Locally Owned & Operated
For Over 24 Years

About Kickout Flashing in Columbus, Georgia

Kickout Flashing Installation and Repair for Stucco, EIFS, and Dryvit in Columbus, Georgia

Understanding Kickout Flashing and Its Importance

In the varied climate of Columbus, Georgia—where the seasons bring a combination of humidity, rainfall, and temperature fluctuations—the integrity of exterior wall systems is critical for protecting both residential and commercial buildings. One aspect of this protection that is often overlooked until damage occurs is kickout flashing. Frequently underestimated or improperly installed, kickout flashing plays a vital role in directing water away from vulnerable areas of a building's façade. Specifically, at the junction where a sloped roof meets a vertical wall, water runoff can be inadvertently channeled into the building envelope if protective measures aren’t incorporated correctly.

For structures finished with stucco, EIFS (Exterior Insulation and Finish Systems), or Dryvit systems, the need for properly installed and maintained kickout flashing becomes even more critical. These systems, while durable and aesthetically pleasing, can be particularly susceptible to water intrusion when essential flashing components are missing or incorrectly installed. Kickout flashing, sometimes referred to as kickout diverter flashing, is engineered to divert water away from such roof-wall intersections and guide it into the gutter system, preventing moisture from infiltrating behind the cladding.

The consequences of water intrusion may manifest slowly—softening structural components, initiating mold growth, and ultimately leading to considerable damage that compromises both aesthetics and structural soundness. Over time, improper water management can erode insulation, rot wooden framing, and damage interior finishes. For property owners in Columbus, proactive attention to features like kickout flashing can significantly extend the life of their stucco, EIFS, or Dryvit exteriors. That’s where a high-quality provider like Advanced Stucco Repair comes in, offering both the expertise and attention to detail necessary to ensure comprehensive protection.

The Installation Process and What It Entails

Installing kickout flashing is a precision task that must integrate seamlessly with both the roofing system and the wall cladding. During initial construction, it should be installed before the stucco, EIFS, or Dryvit is applied, allowing the flashing to interface directly with both roof underlayment and moisture barrier flashing. The flashing piece, which is typically fabricated from corrosion-resistant metal or high-durability plastic, is placed where the roof edge meets the vertical wall, just above the gutter line.

An effective kickout installs behind the step flashing and under the moisture barrier of the wall. When rainwater runs down the roof edge, it encounters the kickout, which redirects it laterally into the gutter instead of allowing it to flow unchecked against the exterior wall. Even with proper gutter systems, inadequate kickout diverter flashing can allow splash-back or seepage, especially if the flashing isn't adequately sized or not installed at the correct angle.

For retrofitting or flashing repair service on an existing stucco, EIFS, or Dryvit-clad building, the process can require removing a portion of the exterior finish to inspect and repair the underlying materials. This underscores the importance of working with skilled professionals who are familiar with the unique demands of exterior insulation systems as well as Columbus’s humid subtropical climate. Advanced Stucco Repair specializes in assessing these circumstances and tailoring solutions that not only restore function but also maintain aesthetic continuity.

Challenges Specific to Stucco, EIFS, and Dryvit Systems

Each of these exterior cladding materials—stucco, EIFS, and Dryvit—possesses distinct characteristics that influence how kickout flashing must be incorporated and maintained. Stucco, a dense and porous cement-based material, needs consistent airflow and drainage behind it to prevent moisture buildup. EIFS and Dryvit, while visually similar to stucco, are systems that include insulation boards and synthetic layers, making them more vulnerable to moisture if water becomes trapped behind their layers.

Where stucco may eventually show discoloration or cracking due to hidden water infiltration, EIFS and Dryvit can begin to delaminate or bubble as water gets caught between layers. Improper or damaged roof-wall intersection flashing acts as a common failure point in these systems. In Columbus, it’s not uncommon to see older properties where kickout flashing was omitted entirely during original construction. Identifying this before damage becomes visible requires trained eyes, and that's another area where Advanced Stucco Repair provides invaluable service. Through moisture mapping and investigative removal processes, they accurately assess vulnerabilities and implement lasting upgrades.

Why Kickout Flashing is Essential in Columbus, Georgia

Columbus experiences an average annual rainfall of 49 inches, with frequent storms during spring and late summer. Combined with the high humidity of the region, these conditions create a high risk environment for moisture damage—particularly around corners and intersections where rooflines meet walls. The challenge isn’t just directing water away, but mitigating the capillary action and wind-driven rain that can find its way into microscopic openings in the building envelope.

This is where the integration of kickout flashing with well-installed moisture barrier flashing becomes crucial. Water damage prevention is not only about visible leaks but about stopping moisture from infiltrating behind the cladding in the first place. Flashing repair service becomes a key component in regular building maintenance. And it’s not just older structures that need this attention—new builds, especially those prioritizing aesthetics over function (as is often the case in rapid development areas), can fall victim to improper flashing practices as well.

Commercial buildings in Columbus, including retail centers, office buildings, and multifamily developments, also benefit significantly from vigilant flashing maintenance. These high-value properties leverage EIFS and Dryvit for their sleek appearance and energy efficiency. The cost of remediating water damage retroactively often far exceeds the investment in proper kickout flashing installation and monitoring, highlighting a proactive approach as the far more economical path.

Real-World Applications and Commercial Case Studies

Over the years, numerous buildings throughout Columbus have seen tangible benefits from upgrading or repairing their kickout flashing systems. In one commercial example, a healthcare facility fitted with EIFS had begun to exhibit signs of internal wall mildew and discoloration just below roof-wall junctions. Investigations revealed that the original construction lacked necessary kickout diverter flashing, enabling water migration into the wall cavity. Advanced Stucco Repair was contracted to remove affected areas, treat hidden mold, replace compromised sheathing, and integrate proper flashing. Today, that structure continues to operate safely and efficiently, with no recurrence of moisture problems.

Another case involved a high-end residential development featuring Dryvit-clad townhomes. Multiple tenants reported persistent internal dampness and musty odors after rains. On inspection, it became clear that roof runoff was being allowed to stream directly down the façade due to missing kickout flashing, penetrating at vulnerable transitions. By retrofitting appropriate flashing and applying auxiliary moisture barrier coatings, the team not only addressed the issue but enhanced the durability of the entire system—potentially extending the life of the Dryvit by decades.

What these examples illustrate is that repairing or installing kickout flashing is not merely a code-compliance task or cosmetic enhancement. It is an essential protective measure for the long-term health of a structure. Businesses and homeowners alike stand to benefit dramatically from this relatively modest investment, especially when backed by experienced professionals who understand the diverse demands of different wall systems and regional weather concerns.

What Sets Quality Flashing Repair Apart

It’s important to understand that not all flashing solutions are created equal. Materials matter, but so does craftsmanship. High-quality roof-wall intersection flashing must integrate seamlessly with the existing water management system, and transitions must be sealed against wind-driven rain and capillary intrusion. Moreover, installation requires responsiveness to both material movement and temperature shifts to prevent cracking or separation over time.

Advanced Stucco Repair brings not only technical knowledge but also hands-on experience in working with complex building envelopes. By carefully evaluating how water behaves and where it naturally collects or channels, their team designs kickout flashing solutions that factor in the long-term performance of stucco, EIFS, and Dryvit systems. Whether it’s a small residential project or a sprawling commercial complex, they prioritize both functionality and visual harmony, ensuring repairs don’t detract from the property’s appearance.

Where failures are already evident, their multidisciplinary method combines remediation, structural reinforcement, and cosmetic restoration. That means clients don’t just receive a quick fix—they receive enduring protection backed by diagnostic accuracy. For Columbus property owners, that peace of mind is invaluable, particularly as summer storms or unexpected weather events grow more common.

Integrated Approach to Moisture Management

Effective kickout flashing doesn’t operate in isolation. It functions as part of a system that includes drainage planes, sealants, guttering, and wall coatings. In properties with stucco exteriors, proprietary mixtures and application techniques can affect how moisture is absorbed or shed. With EIFS and Dryvit systems, even small inconsistencies in sealant application at wall junctions or around windows can allow water into sensitive insulation layers. The interdependence of components means that suboptimal performance in one area can lead to systemic failure.

That’s why successful flashing repair service often involves evaluating several adjacent elements simultaneously. Advanced Stucco Repair’s process incorporates evaluation of the wall's moisture handling ability as well as structural interfaces like windows, doors, and expansion joints. When setbacks are found—whether failed caulking, deteriorated barrier membranes, or poorly aligned step flashing—they’re addressed in conjunction with the kickout installation to ensure holistic integrity.

This integrated methodology not only resolves ongoing issues but prepares the building to endure drastic weather variations and high-humidity conditions unique to Columbus. Preventative repairs, properly coordinated, reduce future maintenance costs and insurance claims, and increase resale confidence for homes and buildings alike.

Choosing the Right Partner for Lasting Results

For those researching exterior repair and water damage control in Columbus, the abundance of contractors can be overwhelming. Yet the nuances of hardcoat stucco, flexible EIFS, and engineered Dryvit systems require specific qualifications to address without compromising material warranties or aesthetic treatments. Not every contractor understands how these systems interact with water, nor how to preserve performance while adding new components like kickout flashing.

Advanced Stucco Repair brings that exact balance—combining regional knowledge, material compatibility, and structural insight. Their technicians are trained specifically in the challenges of exterior cladding systems and understand the demands of both commercial and residential construction across Columbus neighborhoods. Whether dealing with aging townhomes in Midtown or newly developed business parks along Veterans Parkway, they tailor customized solutions that last.

What most clients appreciate is the honesty and clarity with which inspections are handled. There's no pressure to undertake unnecessary work. Instead, the team at Advanced Stucco Repair prioritizes transparency—using moisture meters, infrared imaging, and thoughtful analysis to determine when and where kickout flashing is needed most. While other providers may rush installation or apply generic solutions, this localized, case-specific approach ensures effectiveness and satisfaction.

Even aesthetically, the difference is evident. Their reputation among Columbus architects and property managers stems not just from efficient repairs, but from blending those repairs with the structure’s original texture, coloration, and contours. For owners concerned with preserving the polished look of premium stucco or Dryvit finishes, this expertise makes all the difference—in both performance and appearance.

Looking across the range of projects completed throughout the region, it’s clear that durable, well-implemented kickout flashing provides immense value. Whether you’re noticing early signs of water distress or simply looking to reinforce existing structural protections, taking action now can mean avoiding costly repairs in the future. Water damage doesn’t resolve itself—it progresses silently, behind the walls and beneath the surface.

This underscores the value of trusted professionals like Advanced Stucco Repair, who not only know where and how to address problems but do so in a way that enhances long-term resilience. With each project, they reaffirm the foundational truth: small upgrades like kickout flashing can result in major protections, safeguarding homes and businesses across Columbus from the harsh reality of unmanaged water intrusion.

Kickout Flashing Gallery

Kickout Flashing in Columbus, GA
Kickout Flashing in Columbus, GA
Kickout Flashing in Columbus, GA

Call Us Today to receive your Free Quote for Kickout Flashing in Columbus

Our dedicated team at Advanced Stucco Repair is at-the-ready to provide you with great customer service and first class Kickout Flashing services. Reach out to us at (770) 592-1597 to discuss your Kickout Flashing needs today!

Serving: Columbus, Georgia

Providing Services Of: kickout diverter flashing, roof-wall intersection flashing, moisture barrier flashing, flashing repair service, water damage prevention

About Columbus, Georgia

This was for centuries the traditional Homelands of the Muscogee (Creek) people who thrived along the rivers of the Southeast and whose ancestors were the mound-builders of the Archaic, Woodland and Mississippian eras. Two major cultural centers, "Mother Town" Coweta and "Daughter Town" Cusseta, straddled the Chattahoochee River here. The Lower Muscogee who lived mostly on the east side of the river, eventually assimilated to European ways more than their Upper Muscogee cousins on the west side. Pressure from land-hungry immigrants resulted in the 1827 Land Lottery which distributed Georgia's Muscogee lands to hopeful settlers. The 1830 Indian Removal Act signed by President Andrew Jackson was the final act which forced both Lower and Upper Muscogee off their ancestral lands. Locally, some 15,000 Muscogee were rallied at nearby Fort Mitchell and removed west to Oklahoma a bayonet point with little more than the clothes on their backs. Approximately one-third did not survive the journey. Today's modern Muscogee Nation comprises 4700 square miles of land in Eastern Oklahoma. It is a sovereign nation of 100,000 citizens with deep cultural ties to their ancient ancestral lands in the Southeast.

Founded in 1828 by an act of the Georgia Legislature, Columbus was situated at the beginning of the navigable portion of the Chattahoochee River and on the last stretch of the Federal Road before entering Alabama. The city was named for Christopher Columbus. The plan for the city was drawn up by Dr. Edwin L. DeGraffenried, who placed the town on a bluff overlooking the river. Edward Lloyd Thomas (surveyor) was selected to lay out the town on 1,200 acres. Across the river to the west, where Phenix City, Alabama, is now located, lived several tribes of the Creek and other Georgia and Alabama indigenous peoples. Most Creeks moved west with the 1826 Treaty of Washington. Those who stayed and made war were forcibly removed in 1836.

The river served as Columbus's connection to the world, particularly enabling it to ship its commodity cotton crops from the plantations to the international cotton market via New Orleans and ultimately Liverpool, England. The city's commercial importance increased in the 1850s with the arrival of the railroad. In addition, textile mills were developed along the river, bringing industry to an area reliant upon agriculture. By 1860, the city was one of the more important industrial centers of the South, earning it the nickname the Lowell of the South, referring to an important textile mill town in Massachusetts.

When the American Civil War broke out in 1861, the industries of Columbus expanded their production; this became one of the most important centers of industry in the Confederacy. During the war, Columbus ranked second only to the Confederate capital city of Richmond, Virginia in the manufacture of supplies for the Confederate army. The Eagle Manufacturing Company made various textiles, especially woolens for Confederate uniforms. The Columbus Iron Works manufactured cannons and machinery for the nearby Confederate Navy shipyard, Greenwood and Gray made firearms, and Louis and Elias Haimon produced swords and bayonets. Smaller firms provided additional munitions and sundries. As the war turned in favor of the Union, each industry faced exponentially growing shortages of raw materials and skilled labor, as well as worsening financial opportunities.

Unaware of Lee's surrender to Grant and the assassination of Abraham Lincoln, Union and Confederates clashed in the Battle of Columbus, Georgia, on Easter Sunday, April 16, 1865, when a Union detachment of two cavalry divisions under Maj. Gen. James H. Wilson attacked the lightly defended city and burned many of the industrial buildings. John Stith Pemberton, who later developed Coca-Cola in Columbus, was wounded in this battle. Col. Charles Augustus Lafayette Lamar, owner of the last slave ship in America, was also killed here. A historic marker erected in Columbus notes that this was the site of the "Last Land Battle in the War from 1861 to 1865".

Reconstruction began almost immediately and prosperity followed. Factories such as the Eagle and Phenix Mills were revived and the industrialization of the town led to rapid growth, causing the city to outgrow its original plan. The Springer Opera House was built during this time, attracting such notables as Irish writer Oscar Wilde. The Springer is now the official State Theater of Georgia.

By the time of the Spanish–American War, the city's modernization included the addition of a new waterworks, as well as trolleys extending to outlying neighborhoods such as Rose Hill and Lakebottom. Mayor Lucius Chappell also brought a training camp for soldiers to the area. This training camp, named Camp Benning, grew into present-day Fort Benning, named for General Henry L. Benning, a native of the city. Fort Benning was one of the ten U.S. Army installations named for former Confederate generals that were renamed on 11 May 2023, following a recommendation from the congressionally mandated Naming Commission that Fort Benning be renamed Fort Moore after Lieutenant General Hal Moore and his wife Julia Compton Moore, both of whom are buried on post. On 3 March 2025, the Secretary of Defense ordered that the name of Fort Moore be reverted to Fort Benning. The new name pays tribute to Corporal Fred G. Benning, who was awarded the Distinguished Service Cross for his extraordinary heroism in action during World War I with the U.S. Army in France in 1918.

In the spring of 1866, the Ladies Memorial Association of Columbus passed a resolution to set aside one day annually to memorialize the Confederate dead. The secretary of the association, Mary Ann Williams, was directed to write a letter inviting the ladies of every Southern state to join them in the observance. The letter was written in March 1866 and sent to representatives of all of the principal cities in the South, including Atlanta, Macon, Montgomery, Memphis, Richmond, St. Louis, Alexandria, Columbia, and New Orleans. This was the beginning of the influential work by ladies' organizations to honor the war dead.

The date for the holiday was selected by Elizabeth Rutherford Ellis. She chose April 26, the first anniversary of Confederate General Johnston's final surrender to Union General Sherman at Bennett Place, North Carolina. For many in the South, that act marked the official end of the Civil War.

In 1868, General John A. Logan, commander in chief of the Union Civil War Veterans Fraternity called the Grand Army of the Republic, launched the Memorial Day holiday that is now observed across the entire United States. General Logan's wife said he had borrowed from practices of Confederate Memorial Day. She wrote that Logan "said it was not too late for the Union men of the nation to follow the example of the people of the South in perpetuating the memory of their friends who had died for the cause they thought just and right."

While two dozen cities across the country claim to have originated the Memorial Day holiday, Bellware and Gardiner firmly establish that the holiday began in Columbus. In The Genesis of the Memorial Day Holiday in America, they show that the Columbus Ladies Memorial Association's call to observe a day annually to decorate soldiers' graves inaugurated a movement first in the South and then in the North to honor the soldiers who died during the Civil War.

With the expansion of the city, leaders established Columbus College, a two-year institution, which later evolved into Columbus State University, now a comprehensive center of higher learning and part of the University System of Georgia.

The city government and the county consolidated in 1971, the first such consolidation in Georgia and one of only 16 in the U.S. at the time.

Expanding on its industrial base of textile mills, the city is the home of the headquarters for Aflac, Synovus, and TSYS.

From the 1960s through the 1980s, the subsidized construction of highways and suburbs resulted in drawing off the middle and upper classes, with urban blight, white flight, and prostitution in much of downtown Columbus and adjacent neighborhoods. Early efforts to halt the gradual deterioration of downtown began with the saving and restoration of the Springer Opera House in 1965. It was designated as the State Theatre of Georgia, helping spark a movement to preserve the city's history. This effort has documented and preserved various historic districts in and around downtown.

Through the late 1960s and early 1970s, large residential neighborhoods were built to accommodate the soldiers coming back from the Vietnam War and for those associated with Fort Benning. These range from Wesley Woods to Leesburg to Brittney and Willowbrook and the high-end Sears Woods and Windsor Park. Large tracts of blighted areas were cleaned up. A modern Columbus Consolidated Government Center was constructed in the city center. A significant period of urban renewal and revitalization followed in the mid- to late 1990s.

With these improvements, the city has attracted residents and businesses to formerly blighted areas. Municipal projects have included construction of a softball complex, which hosted the 1996 Olympic softball competition; the Chattahoochee RiverWalk; the National Civil War Naval Museum at Port Columbus; and the Coca-Cola Space Science Center. Other notable projects were the expansion of the Columbus Museum and road improvements to include a new downtown bridge crossing the Chattahoochee River and into Phenix City. During the late 1990s, commercial activity expanded north of downtown along the I-185 corridor.

During the 2000s, the city began a major initiative to revitalize the downtown area. The project began with the South Commons, an area south of downtown containing the softball complex, A. J. McClung Memorial Stadium, Synovus Park, the Columbus Civic Center, and the Jonathan Hatcher Skateboard Park. The National Infantry Museum was constructed in South Columbus, located outside the Fort Benning main gate.

In 2002, Columbus State University, which previously faced expansion limits due to existing residential and commercial districts surrounding it, began a second campus downtown, starting by moving the music department into the newly opened RiverCenter for the Performing Arts. The university's art, drama, and nursing departments also moved to downtown locations. Such initiatives have provided Columbus with a cultural niche; downtown features modern architecture mixed among older brick facades.

The Ready to Raft 2012 project created an estimated 700 new jobs and is projected to bring in $42 million annually to the Columbus area. Demolishing an up-river dam allowed the project to construct the longest urban whitewater rafting course in the world. According to the Columbus Convention and Visitors Bureau, this initiative, in addition to other outdoor and indoor tourist attractions, led to around 1.8 million visitors coming to Columbus during the city's 2015 fiscal year.

The city predicted that an additional 30,000 soldiers would be trained annually at Fort Benning in upcoming years due to base realignment and closure of other facilities.

In October 2024, Columbus Police Department Chief Stoney Mathis announced a full staff had been achieved. The Department reported a force consisting of 369 police officers and 54 dispatchers.

Columbus is one of Georgia's three Fall Line cities, along with Augusta and Macon. The Fall Line is where the hilly lands of the Piedmont plateau meet the flat terrain of the coastal plain. As such, Columbus has a varied landscape of rolling hills on the north side and flat plains on the south. The fall line causes rivers in the area to decline rapidly towards sea level. Textile mills were established here in the 19th and early 20th centuries to take advantage of the water power from the falls.

Interstate 185 runs north–south through the middle of the city, with nine exits within Muscogee County. I-185 runs north about 50 mi (80 km) from its beginning to a junction with I-85 just east of LaGrange and about 60 mi (97 km) southwest of Atlanta. U.S. Route 27, U.S. Route 280, and Georgia State Route 520 (known as South Georgia Parkway) all meet in the interior of the city. U.S. Route 80 runs through the northern part of the city, locally known as J.R. Allen Parkway; Alternate U.S. Route 27 and Georgia State Route 85 run northeast from the city, locally known as Manchester Expressway.

The city is located at 32°29′23″N 84°56′26″W / 32.489608°N 84.940422°W / 32.489608; -84.940422.

According to the US Census Bureau, the city has a total area of 221.0 square miles (572 km), of which 216.3 square miles (560 km) are land and 4.7 square miles (12 km) (2.14%) are covered by water.

Columbus borders Phenix City, its largest suburb (in Alabama). Columbus also borders Chattahoochee, Talbot, Harris, and Russell County, which is in Alabama.

Columbus has a humid subtropical climate (Köppen Cfa). Daytime summer temperatures often reach highs in the mid-90°Fs, and low temperatures in the winter average in the upper 30s. Columbus is often considered a dividing line or "natural snowline" of the southeastern United States with areas north of the city receiving snowfall annually, with areas to the south typically not receiving snowfall every year or at all. Columbus is within USDA hardiness zone 8b in the city center and zone 8a in the suburbs.

Columbus is divided into five geographic areas:

  • Downtown, also sometimes called "Uptown" (though "Uptown" is actually the title given to both a nonprofit organization operating to encourage area growth and development or "urban renewal" in the city and also to the actual physical area of that development itself, which is an expanding subsection of the downtown district located in the areas from Broadway to the Chattahoochee River) is the city's central business district, and home to multiple historic districts, homes, and churches, such as the Columbus Historic Riverfront Industrial District, the Mott House, and the Church of the Holy Family.
  • East Columbus is a predominantly residential area located east of MidTown.
  • MidTown is a residential and commercial area located directly east of Downtown; several historic districts have been designated. It is the location of the corporate headquarters of Aflac.
  • North Columbus, also called Northside, is a diverse suburban area, home to established neighborhoods and subdivisions, such as Green Island Hills and Oldtown. It has multiple shopping and lifestyle areas.
  • South Columbus is situated just south of the MidTown region, and directly north of Fort Benning. It is the site of the National Infantry Museum, honoring the history of infantry forces in the U.S. Army. The museum was located here in an effort to introduce jobs and attract visitors to stimulate a variety of activities. It has had bars, honky tonks, and other businesses that appeal to young male soldiers from Fort Benning.

The Columbus metropolitan area includes four counties in Georgia, and one in Alabama. The Columbus-Auburn-Opelika, GA-AL combined statistical area includes two additional counties in Alabama. A 2013 census estimate showed 316,554 in the metro area, with 501,649 in the combined statistical area.

Historical population
CensusPop.Note%±
18301,152—
18403,114170.3%
18505,94290.8%
18609,62161.9%
18707,401−23.1%
188010,12336.8%
189017,30370.9%
190017,6141.8%
191020,55416.7%
192031,12551.4%
193043,13138.6%
194053,28023.5%
195079,61149.4%
1960116,77946.7%
1970155,02832.8%
1980169,4419.3%
1990178,6815.5%
2000185,7814.0%
2010189,8852.2%
2020206,9229.0%
2023 (est.)201,877−2.4%
U.S. Decennial Census
1990 2000 2010 2020
Columbus, Georgia – Racial and ethnic composition
Note: the US Census treats Hispanic/Latino as an ethnic category. This table excludes Latinos from the racial categories and assigns them to a separate category. Hispanics/Latinos may be of any race.
Race / Ethnicity (NH = Non-Hispanic) Pop 2000 Pop 2010 Pop 2020 % 2000 % 2010 % 2020
White alone (NH) 90,200 82,890 79,083 48.55% 43.65% 38.22%
Black or African American alone (NH) 80,698 85,119 94,701 43.44% 44.83% 45.77%
Native American or Alaska Native alone (NH) 614 599 488 0.33% 0.32% 0.24%
Asian alone (NH) 2,788 4,061 5,546 1.50% 2.14% 2.68%
Pacific Islander alone (NH) 248 378 517 0.13% 0.20% 0.25%
Some Other Race alone (NH) 297 432 1,076 0.16% 0.23% 0.52%
Mixed Race or Multi-Racial (NH) 2,568 4,296 8,998 1.38% 2.26% 4.35%
Hispanic or Latino (any race) 8,368 12,110 16,513 4.50% 6.38% 7.98%
Total 185,781 189,885 206,922 100.00% 100.00% 100.00%

Since the 1830 United States census, Columbus has maintained a relatively positive population growth. At the 2020 census, there were 206,922 people, 73,134 households, and 45,689 families residing in the city. At the 2010 census, Columbus had a total population of 189,885, up from 186,291 in the 2000 census. The 2010 census reported 189,885 people, 72,124 households, and 47,686 families residing in the city. The population density was 861.4 inhabitants per square mile (332.6/km). The 82,690 housing units had an average density of 352.3 per square mile (136.0/km).

In 2010, the racial and ethnic composition of the city was 46.3% White, 45.5% African American, 2.2% Asian, 0.2% Native American, 0.14% Pacific Islander, and 1.90% from other races. Hispanics or Latinos of any race were 6.4% of the population. In 2020, its population was 38.22% non-Hispanic white, 45.77% African American, 0.24% Native American, 2.68% Asian, 0.25% Pacific Islander, 0.52% some other race, 4.35% multiracial, an 7.98% Hispanic or Latino of any race.

At the 2010 census, median income for a household in the city was $41,331, and for a family was 41,244. Males had a median income of $30,238 versus $24,336 for females. The per capita income for the city was $22,514. About 12.8% of families and 15.7% of the population were below the poverty line, including 22.0% of those under age 18 and 12.1% of those age 65 or over. According to the 2022 American Community Survey, the median household income throughout the city was $53,750 with a per capita income of $31,393. Approximately 17.8% of the population lived at or below the poverty line.

There is a Mexican community in the city.

The Muscogee County School District holds preschool to grade 12, and consists of 35 elementary schools, 12 middle schools, and nine high schools. The district has over 2,000 full-time teachers and over 31,899 students.

Muscogee County School District serves all parts of the county except Fort Benning for grades K-12. Fort Benning children are zoned to Department of Defense Education Activity (DoDEA) schools for grades K-8. However, high school students attend the public high schools in the respective counties they are located in.

Columbus is served by four branches of the Chattahoochee Valley Libraries:

  • Columbus Public Library
  • Mildred L. Terry Public Library
  • North Columbus Public Library
  • South Columbus Public Library
  • Columbus State University
  • Columbus Technical College
  • Georgia Military College – main campus in Milledgeville, Georgia
  • Christian Life School of Theology
  • Miller-Motte Technical College – main campus in Wilmington, North Carolina
  • Rivertown School of Beauty
  • Southeastern Beauty School
  • Strayer University – main campus in Baltimore, Maryland
  • Embry-Riddle Aeronautical University Fort Benning – main campus in Daytona Beach, FL
  • Mercer University School of Medicine - main campus in Macon, Georgia

Call Us Today to receive your Free Quote for Kickout Flashing in Columbus

Related Services in Columbus, Georgia

Dryvit Columbus, Dryvit Repair Columbus, EIFS Columbus, Eifs Contractor Columbus, Eifs Exterior Finish System Columbus, Eifs Exterior Insulation Finishing System Columbus, Eifs Repair Columbus, Expansion Joints Columbus, Fill Stucco Holes Columbus, Fix Stucco Cracks Columbus, Fixing Stucco Columbus, Home Stucco Columbus, House Stucco Columbus, Insulation Boards Columbus, Kick Out Flashings Columbus, Plaster Walls Columbus, Repair Stucco Columbus, Repairing Plaster Columbus, Stucco Columbus, Stucco Base Coat Columbus, Stucco Cement Columbus, Stucco Contractor Columbus, Stucco Finish Columbus, Stucco Flashing Columbus, Stucco Foam Trim Columbus, Stucco Interior Walls Columbus, Stucco Mesh Columbus, Stucco Over Brick Columbus, Stucco Paint Columbus, Exterior Foam Trim Molding Columbus, Stucco Cost Columbus, Stucco Molding Columbus, Stucco Patch Columbus, Stucco Repair Columbus, Stucco Textures Columbus, Stucco Maintenance Columbus, Energy Efficient Stucco Columbus, Drainable Exterior Insulation Columbus, Traditional Stucco Finish Columbus, Exterior Joint Sealants Columbus, Fiber Cement Siding Installation Columbus, Interior Wall Plaster Repair Columbus, Stucco and EIFS Protection Coatings Columbus, Stucco System Upgrades Columbus, Stucco Maintenance Services Columbus, Stucco Waterproofing Coatings Columbus, Stucco Removal and Replacement Columbus, Stucco Resurfacing Services Columbus, Stucco Impact Repair Columbus, Hard Coat Stucco System Columbus, Stucco Sealant Replacement Columbus, Stucco Waterproofing Columbus, Kickout Flashing Columbus, Waterproof Coating Systems Columbus, Leak Detection Columbus

We Serve Businesses In The Following Zip Codes:

30004, 30005, 30006, 30007, 30008, 30009, 30017, 30019, 30022, 30023, 30028, 30030, 30031, 30032, 30033, 30034, 30035, 30036, 30037, 30040, 30041, 30042, 30043, 30044, 30045, 30046, 30047, 30048, 30049, 30052, 30058, 30060, 30061, 30062, 30063, 30064, 30065, 30066, 30067, 30068, 30069, 30070, 30071, 30072, 30073, 30074, 30075, 30076, 30077, 30078, 30079, 30080, 30081, 30082, 30083, 30084, 30085, 30086, 30087, 30088, 30089, 30090, 30091, 30092, 30093, 30094, 30095, 30096, 30097, 30098, 30099, 30101, 30102, 30103, 30104, 30105, 30106, 30107, 30108, 30109, 30110, 30111, 30112, 30113, 30114, 30115, 30116, 30117, 30118, 30119, 30120, 30121, 30122, 30123, 30124, 30125, 30126, 30127, 30128, 30129, 30130, 30131, 30132, 30133, 30134, 30135, 30136, 30137, 30138, 30139, 30140, 30141, 30142, 30143, 30144, 30145, 30146, 30147, 30148, 30149, 30150, 30151, 30152, 30153, 30154, 30155, 30156, 30157, 30158, 30159, 30160, 30161, 30162, 30163, 30164, 30165, 30166, 30167, 30168, 30169, 30170, 30171, 30172, 30173, 30174, 30175, 30176, 30177, 30178, 30179, 30180, 30181, 30182, 30183, 30184, 30185, 30186, 30187, 30188, 30189, 30190, 30191, 30192, 30193, 30194, 30195, 30196, 30197, 30198, 30199, 30200